MG Chemicals - 426-NS - Desoldering Braid, No Clean Super Wick, 5ft L X

Cleaned and manufactured using environmentally friendly technology. MG Chemicals - 426-NS - Desoldering Braid, No Clean Super Wick, 5ft L X Keep away from moisture. Recommended PreparationWicking works best for the removal of surface solders. Just lay the Super Wick on the soldered joint, apply tip of soldering iron to top-side for one second, and lift iron and Super Wick together to leave a clean connection ready for component removal or replacing. Super Wick SUPERWICK 423 1.5m Desoldering Braid, Width 1mm RS Shrink wrapping is recommended for extended storage. Remove the most expensive circuitry with confidence. For lead-free solder, start with tip temperature of about 315 °C (599 °F) and adjust as necessary.3.(Optional) Apply flux to the lead or land area.4.Set the braid on the solder to be removed.5.Place the solder tip on the braid, avoiding contact with other components.6.When wicking action has ended, remove the soldering iron and braid together from the surface.7.Cut off the used section of the braid and discard.8.Let the area cool, clean the tip with the sponge, and repeat removal steps as necessary.9.Clean flux residue that may have accumulated with a flux remover like the MG #4140, MG #4140A, MG #4050A or MG #413B. Product Category: Desoldering Braid / Solder Removal RoHS: Details Product: Solder Braid/Solder Wick Length: 25 ft Size: 1.27 mm / 0.05 in Color: Yellow Brand: MG Chemicals Product Type: Solder Removal Series: 442 Factory Pack Quantity: Factory Pack Quantity: 5 Subcategory: Solder & Equipment Unit Weight: 0.888904 oz To show similar products... Fine Braid Super Wick is a tightly woven, oxide-free copper solder wick coated with RMA flux. Its high purity and tight weave make it fast-wicking, quickly removing solder and minimizing dwell time Super Wick is pure copper, specially woven wound on a pocket size spool with pressurized periphery., ROHS Compliant, Oxide-free clean copper , Static free bobbins